802.x Standards Used to Specify Wireless Networks
The list of 802.x standards used to specify wireless networks and what to look for in wireless frequency ranges and 802.11 speeds.What to Look For in Wireless Network Range, Speed and Standards
If you have doubts about your wireless networking card shopping and choices, there are three key issues you need to consider: range, speed, and standards.802.x Standards Used to Specify Wireless Networks:
Typical Wireless Networking Equipment Specification

- High-speed, long-range, wireless networking for your notebook computer
- MIMO smart antenna technology captures faint signals for extended range and reduced dead spots
- Much faster than Wireless-G when connected to RangePlus or Wireless-N, but also works great with Wireless-G and -B devices
- Advanced wireless security: Wi-Fi Protected Access™ (WPA2) with up to 256-bit encryption
Surely enough, some of these aspects are often overlooked. So, let's go
through the issues that are truly significant for your wireless card shopping.
802.x Standards Used to Specify Wireless Networks:
What Frequency Range Is Wireless?
When the features describe the range, it actually refers to the maximum
wireless frequency ranges of wireless cards if nothing went wrong. Practically,
this number might be decreased by as much as 90% by solid walls and interference.
Without sufficient range, your wireless network will probably be of no use. Why would you have wireless networks when you have to keep all the computers in the same room to make their connection possible?
Generally, it's advisable to buy approximately four times the strength you'd think you will require, unless your walls are made of drywall or wood. Even under ideal conditions, try to buy twice as much, to be sure. If you have to switch from metric to imperial units, keep in mind that 1 foot is made up of 30 centimeters (0.3 meters), while an inch is made up of 2.5 centimeters.
802.11 Speeds
Remember where 'Mbps' appeared in that text? This stands for the speed of the wireless connection. 11 Mbps corresponds to about one and a half megabytes per second. If you want to convert megabits (Mb) to megabytes (MB), simply divide by eight. All 802.11b wireless cards operate at a speed of 11Mbps, while 802.11g wireless cards have a speed of 54Mbps (in the future this speed is expected to grow even further).
Wireless cards with the 'n' specification can go up to 600 Mbps! That's fast -- but you might not have compatible equipment yet.
Speed is an extremely important aspect of wireless networking, as
it has a direct impact on the time you need to wait for information to
be transmitted from one computer to another. Nevertheless, it is less
significant for Internet use, as there are few Internet connections operating
at speeds that exceed 11Mbps.
Wireless Networking Standards

Actually, while 802.11b and 802.11g are compatible with each other, 802.11a is not compatible with either so you shouldn't buy 802.11a. If we compare b with g, g is more expensive but faster as well. Therefore, adding a b-speed device to a g-speed device can often cause the whole network to slow down to b-speed, making the g-devices useless.
Make sure to check your device's standards before you make your purchase. Buy only wireless networking devices that are compatible with your existing equipment and remember that a bad choice can make your system extremely slow.
Check out the top sellers, latest equipment and customer reviews on wireless networking now!
Return to the top of 802.x standards used to specify wireless networks.
And for more information on wireless networking, go to Intro to Wireless Networking -- What is an Infrared Wireless LAN?










































































